Datasheet

ManualsBrandsIntel ManualsComputersR1304BTLSFAN

Appendix D: POST Error Beep Codes

Intel

Server System R1304BTSSFAN/R1304BTLSFAN/R1304BTLSHBN TPS

54 Revision 2.0

Intel order number G17455-004

Appendix D: POST Error Beep Codes

The following table lists POST error beep codes. Prior to system video initialization, the BIOS

uses these beep codes to inform users of error conditions. The beep code is followed by a user-

visible code on POST Progress LEDs.

Table 34. POST Error Messages and Handling

Error Code Error Message Response

0012 CMOS date/time not set Major

0048

Password check failed Major

0140

PCI component encountered a PERR error Major

0141

PCI resource conflict Major

0146 PCI out of resources error Major

5220 CMOS/NVRAM configuration cleared Major

5221

Passwords cleared by jumper Major

5224

Password clear jumper is Set Major

8160

Processor 01 unable to apply microcode update Major

8180 Processor 01 microcode update not found Minor

8190

Watchdog timer failed on last boot Major

8198

OS boot watchdog timer failure Major

8300

Baseboard management controller failed self-test

Major

8305

Hot Swap Controller failure Major

83A0

Management Engine (ME) failed Selftest Major

83A1

Management Engine (ME) Failed to respond. Major

84F2

Baseboard management controller failed to respond Major

84F3

Baseboard management controller in update mode Major

84F4

Sensor data record empty Major

84FF

System event log full Minor

8500 Memory component could not be configured in the selected RAS mode Major

8501 DIMM Population Error Major

8520

DIMM_A1 failed test/initialization Major

8521

DIMM_A2 failed test/initialization Major

8523

DIMM_B1 failed test/initialization Major

8524 DIMM_B2 failed test/initialization Major

8540 DIMM_A1 disabled Major

8541 DIMM_A2 disabled Major

8543

DIMM_B1 disabled Major

8544

DIMM_B2 disabled Major