Spares, parts list, and configuration guide

20
AXX10GBNIAIOM
917905
735858241090
5032037035842
1
Dual SFP+ port 10GbE IO module based on Intel
®
82599 10 Gigabit Ethernet Controller
Supports direct connect or transceiver.
Cables/transceivers not included.
Includes three screws.
Requires IO Module Kit AXXIOMKIT.
AXX10GBTWLIOM
917907
735858241113
5032037035866
1
Dual RJ-45 port 10GBASE-T IO module, based on Intel
®
Ethernet Controller X540
Includes three screws.
Requires IO Module Kit AXXIOMKIT.
AXX4P1GBPWLIOM
917911
735858241083
5032037035835
1
Quad port 1GbE IO Module based on Intel
®
Ethernet
Controller I350
Requires IO Module Kit AXXIOMKIT.
AXXQAAIOMOD
920561
735858244848
5032037039413
1
Intel
®
Quick Assist Accelerator I/O Module
Requires IO Module Kit AXXIOMKIT.
Note: This accessory will not be available at launch.
AXXQAAPCIE
920562
735858244855
5032037039420
1
Intel
®
Quick Assist Accelerator PCIe card.
Note: This accessory will not be available at launch.
AUPLGPUBR
920612
00735858244480
5032037039055
1
Bracket for securing full length GPU cards to fan
bulkhead, for use in P4000L/P4000L-WS, includes 1
bracket, 4 1100mm GPGPU power cables and 7 screws
for GPGPU fixture. Each GPGPU power cable has one
2x2-pin header to one 2x3-pin header plus one 2x1
header and one 2x3-pin header. The 2x3 header plus the
2x1 header can combine to a standard 2x4-pin header
per GPGPU card’s requirement.
Picture not yet available
AUPLCOPROBR
926365
00735858257053
5032037049146
1
Bracket for securing full length double width GPU cards
to fan bulkhead, for use in P4000L/P4000L-WS, includes
1 bracket, 4 GPGPU power cables, 4 Intel
®
Xeon
®
Phi™
Coprocessor PCI Express* Card extension brackets,
screws. Target availability: Q1’13