Users guide

Intel® RAID Software User Guide 254
storcli -v
This command shows the version of the Storage Command Line Tool.
10.5.2 Controller Commands
Controller commands provide information and perform actions related to the specified
controller, such as the
/c0 controller. The Storage Command Line Tool supports the
controller commands described in this section.
10.5.2.1 Show and Set Controller Properties Commands
Table 19. Controller Commands Quick Reference Table
This section provides command information to
show and set controller properties.
Note: Y
ou cannot set multiple properties with a single command.
storcli /cx show <property>
This command shows the current value of the specified property on the specified
controller.
General example output:
Status Code = 0
Status = Success
Description = None
Controller: 0
Property_name = Property_value
You can show the following properties using the storcli /cx show
<property1>|<property2>
command.
storcli /cx show abortcconerror
storcli /cx show act
ivityforlocate
storcli /cx show ala
rm
Command Value Range Description
show <pro
perties> See Table20. Shows specific controller
properties.
set <properties> See Table20. Sets controller properties.
show all: Sho
ws all properties of
the virtual drive.
freespace: Sh
ows the
freespace in the controller.
See “Controller Show
Commands” on page260.
Shows physical drive
in
formation.