Users guide

Intel® RAID Software User Guide 262
storcli /cx set patrolread {=on mode=<auto|manual>}|{off}
This command turns the patrol read scheduling on and sets the mode of the patrol read to
automatic or manual.
Input example:
storcli /c0 set patrolread=on mode=manual
storcli /cx set patr
olread [starttime=<yyyy/mm/dd hh>]
[maxconcurrentpd=<value>] [includessds=<on|off>]
[uncfgareas=on|off]
This command schedules a patrol read operation. You can use the following options for
patrol read command.
Table 21. Set Patrolread Input Options
Note: Contr
oller time is taken as a reference for scheduling a patrol read operation.
Input example:
storcli /c0 set patrolread=on starttime=2012/02/21 00
storcli /cx set patr
olread [delay=<value>]
This command delays the scheduled patrol read in hours.
Input example:
storcli /c0 set patrolread delay=30
storcli /cx show pat
rolRead
This command shows the progress on the current patrol read in percentage.
Input example:
storcli /c0 show patrolread
Option Value Range Description
starttime A valid date and hour in
24-hour format
Sets the start time in
yyyy/
mm/dd hh format.
maxconcurrentpd Valid number of physical
drives present
Sets the number of physical
drives that can be patrol read
at a single time.
includessds — Include SSDs in the patrol
read.
uncfgareas — Include the areas not
con
figured in the patrol read.