Users guide

Intel® RAID Software User Guide 264
Input example:
storcli /c0 set CC=on starttime=2012/02/21 00 excludevd v0-v3
storcli /cx show cc
This command shows the consistency check schedule properties for a controller.
Input example:
storcli /c0 show cc
storcli /cx show ccr
ate
This command checks the status of a consistency check operation. The CC rate appears in
percentage.
Input example:
storcli /c0 show ccrate
Note: A high CC rate slows I/O processing.
10.5.2.4 Premium Feature Key Commands
The Storage Command Line Tool supports the following commands for premium feature
keys:
storcli /cx set advancedsoftwareoptions(aso) key=<value> [preview]
storcli /cx aso
[
transfertovault][rehostcomplete][deactivatetrialkey]
storcli /cx show saf
eid
The detailed description for the command follows.
delay -1 and any integer value. Delays a scheduled consistency check.
The value is in hours. A value of
0
makes the CC runs continuously with no
delay (in a loop).
Note: Only scheduled consistency
checks can be delayed.
starttime A valid date and hour in
24-hour format.
Start time of a consistency check is in
yyyy/mm/dd hh format.
excludevd The range should be less
than the number of virtual
drives.
Excludes virtual drives from the
con
sistency checks. To exclude
particular virtual drives, you can provide
list of virtual drive names (Vx,Vy …
format) or the range of virtual drives that
you want to exclude from a consistency
check (Vx-Vy format). If this option is not
specified in the command, no virtual
drives are excluded.
Option Value Range Description