Users guide

Intel® RAID Software User Guide 322
182 Warning Enclosure %s not supported; too ma
ny enclosures connected to port
183 Critical Enclosure %s firmware mismatch
184 Warning Enclosure %s sensor %d bad
185 Critical Enclosure %s phy %d bad
186 Critical Enclosure %s is unstable
187 Critical Enclosure %s hardware error
188 Critical Enclosure %s not responding
189 Info SAS/SATA mixing not supported in enclosure; PD %s disabled
190 Info Enclosure (SES) hotplug on %s was detected, but is
not supported
191 Info Clustering enabled
192 Info Clustering disabled
193 Info PD too small to be used for auto-rebuild on %s
194 Info BBU enabled; changing WT virtual disks to WB
195 Warning BBU disabled; changing WB virtual disks to
WT
196 Warning Bad block table on PD %s is 80% full
197 Fatal Bad block table on PD %s is full; unable to log block %lx
198 Info Consistency Check Aborted Due to Ownership Loss on %s
199 Info Background Initialization (BGI) Aborted Due to Ownership Loss on %s
200 Critical Battery/charger problems detected; SOH Bad
201 Warning Single-bit ECC error: ECAR=%x, EL
OG=%x, (%s); warning threshold
exceeded
202 Critical Single-bit ECC error: ECAR=%x, ELOG=%x, (%s); critical threshold
exceeded
203 Critical Single-bit ECC error: ECAR=%x, EL
OG=%x, (%s); further reporting
disabled
204 Critical Enclosure %s Power supply %d switched off
205 Info Enclosure %s Power supply %d switched on
206 Critical Enclosure %s Power supply %d cable removed
207 Info Enclosure %s Power supply %d cable inserted
208 Info Enclosure %s Fan %d returned to normal
209 Info BBU Retention test was initiated on previous boot
210 Info BBU Retention test passed
Number Type Description