Users guide

323 Intel® RAID Software User Guide
211 Critical BBU Retention test failed!
212 Info NVRAM Retention test was initiated on previous boot
213 Info NVRAM Retention test passed
214 Critical NVRAM Retention test failed!
215 Info %s test completed %d passes successfully
216 Critical %s test FAILED on %d pass. Fail data: errorOffset=%x goodData=%x
badData=%x
217 Info Self check diagnostics completed
218 Info Foreign Configuration Detected
219 Info Foreign Configuration Imported
220 Info Foreign Configuration Cleared
221 Warning NVRAM is corrupt; reinitializing
222
Warning NVRAM mismatch occurred
223 Warning SAS wide port %d lost link on PHY %d
224 Info SAS wide port %d restored link on PHY %d
225 Warning SAS port %d, PHY %d has exceeded the allowed error rate
226 Warning Bad block reassigned on %s at %lx to %lx
227 Info Controller Hot Plug detected
228 Warning Enclosure %s temperature sensor %d differential detected
229 Info Drive test cannot start. No qualifying drives found
230 Info Time duration provided by host is not sufficient for self check
231 Info Marked Missing for %s on drive group %d row %d
232 Info Replaced Missing as %s on drive group %d row %d
233 Info Enclosure %s Temperature %d returned to normal
234 Info Enclosure %s Firmware download in progress
235 Warning Enclosure %s Firmware download failed
236 Warning %s is not a certified drive
237 Info Dirty cache data discarded by user
238 Info Drives missing from configuration at boot
239 Info Virtual drives (VDs) missing drives and will go offline at boot: %s
Number Type Description