Technical Product Specification

Intel® Local Control Panel for EPSD Platforms TPS Firmware Functional Specification
Revision 1.0 Intel order number G83726-001
11
3.5.5 Power (Pow)
Selecting Pow item in the View menu displays the amount of AC power drawn by the system in
Watts.
Figure 16: Power Consumed by the System Currently
3.5.6 Last POST Code (Last PC)
Selecting LPC item in the View menu displays the last BIOS POST (Power On Self Test) code
in hexadecimal. If the Last POST Code details are not available with the BMC, then No BIOS
POST CODE message is displayed. The last POST code is displayed only when the POST is in
progress. Once the POST is complete, then it displays POST Complete message.
Figure 17: Last BIOS POST Code
3.6 Configuration (Conf) Menu
If the user selects Conf item in the main menu, then the following options will be displayed
to configure:
Figure 18: Configure Menu Items
The following sub-sections will explain individual items of the configuration menu.
3.6.1 BMC LAN (BL) Configuration
If the user selects BL item in the Conf menu, then the following options will be displayed:
Figure 19: BMC IP Configuration Menu
Selecting IPSource in the above menu leads to the following screen. Based on the user’s
selection in the following menu, BMC IP source will be set either as Static or DHCP.
Figure 20: BMC IP Source Configuration Menu
If the user selects DHCP or the existing IP source is DHCP, then the other menu items, that is,
IP Address, Subnetmask, and Gateway are not configurable. If the user selects Static or the
existing setting is static for IP source, then the user is allowed to change the other menu items
|xxxx W
|XX
|BL|RL|BDev|Ban
|IPSource|IPAddr|SMask|GWay
|Static|DHCP