Technical Product Specification

Installing and Removing the Intel® Local Control Panel Intel® Local Control Panel for EPSD Platforms TPS
Intel order number G83726-001 Revision 1.0
18
4.3 Installing the Intel
®
A1U2ULCP Local Control Panel in a 2U server system
1. Remove the system top cover.
2. For 2U system with 2.5” hard drive configuration, remove the stiffener first. Please refer
to the Intel
®
Server System Service Guide for detailed instructions.
3. For 2U system with 2.5” hard drive configuration, remove the three screws to release the
hard drive cage (see letter A). For 2U system with 3.5” hard drive configuration, remove
the six screws to release the hard drive cage. Please refer to the Intel
®
Server System
Service Guide for detailed instructions.
4. Disconnect the front video cable and the front USB cable from the server board
(see letter B).
5. Slide out the cage from server chassis together with cables (see letter C).
Figure 29: Removing the cage in a 2U server system
6. Remove the two screws to release the bracket (see letter D).
7. Slide out the bracket from cage together with cables (see letter E).
8. Remove the two screws and slide out the front USB connecter from the bracket
(see letter F).