User Guide

Intel® BMC And RMM4 User Guide Intel® Integrated BMC Web Console Options
Revision 2.8 Intel order number H54847-001 89
7.3.2 IPv6 Page on Intel
®
Server Boards and Systems Based on Intel
®
Xeon
®
Processor E5-4600/2600/2400/1600/1400 (v1&v2) Product Families,
S1200V3RP and Intel
®
Server Boards and Systems Based on Intel
®
Xeon
®
Processor E5-2600 V3 --- S2600WT, S2600KP, S2600TP and S2600CW
The IPv6 settings page is used to enable and configure the IPv6 network settings. You can also
enable and configure LAN Failover on this page. See Figure 80 for details.
Figure 80: Configuration IPv6 Page
WARNING
Each network controller must be on a different subnet than all other controllers used for
management traffic.
WARNING
When LAN failover is enabled, the system administrator must ensure that each network
controller connection, which can be seen by the BMC, has connectivity to the same networks.
If there is a loss of functionality on the primary network controller channel, it will randomly
failover to any of the other network controller channels that are connected and seen by the
BMC.
The following table lists the options available in this page.