User Guide

Intel® BMC And RMM4 User Guide Intel® Integrated BMC Web Console Options
Revision 2.8 Intel order number H54847-001 95
7.3.5 LDAP Settings Page
To enable/disable LDAP, check or uncheck the Enable LDAP Authentication checkbox
respectively.
Figure 86: Configuration LDAP Settings Page
The following table lists the options available in this page.
Table 16: Configuration LDAP Settings Options
Option Task
Enable LDAP Authentication Check this box to enable LDAP authentication, then enter the required information to
access the LDAP server.
Port Specify the LDAP port.
IP Address The IP address of LDAP server.
The IP address is made of four numbers separated by dots as in "xxx.xxx.xxx.xxx".
'xxx' ranges from 0 to 255.
First 'xxx' must not be 0.
Searchbase The searchbase of the LDAP server, for example, "dc=my-domain, dc=com".
Bind Password The authentication password for the LDAP server; the password must be at least four
characters long.
Bind DN The Distinguished Name of the LDAP server, for example, "cn=Manager, dc=my-domain,
dc=com".
Save button Click to save the current settings.