User Guide

Intel® Integrated BMC Web Console Options Intel® BMC And RMM4 User Guide
104 Intel order number H54847-001 Revision 2.8
Figure 92: Configuration Remote Session Page on Intel
®
Server Boards and Systems Based on Intel
®
Xeon
®
Processor E5-2600 V3 --- S2600WT, S2600KP, S2600TP and S2600CW
The following table lists the options that can be used to configure the settings used during a
redirection session.
Table 21: Configuration Remote Session Options
Option Task
KVM Encryption mode
Disable or select encryption mode on KVM or Media data during a redirection session.
Choose any one from the supported encryption techniques (None, Stunnel*, RC4, or AES).
Note: KVM and Media encryption are enabled by default.
Note: Disabling encryption can improve performance of KVM or Media redirection.
Keyboard/Mouse Only
If KVM Encryption is set to None, the Keyboard and Mouse data can still be encrypted using
Blowfish encryption.
Note: This option has the least performance impact while still encrypting the most important
data.
Media Encryption
Enable/Disable encryption of Media data during a redirection session.
Note: Disabling encryption can improve performance of KVM or Media redirection.
USB Key Emulation Type
Select Floppy or Hard Disk emulation.
Default Ports Only needs to be configured if there is NAT (Network Address Translation) or port forwarding
on your network between the client side (web browser and JViewer application) and the BMC
side.
Enter the browser-side port number (1024-65535) for each of the redirection services
(remote KVM, virtual CDROM, and virtual USB/Floppy) that the JVIewer client should use.
JViewer assumes no translation and uses the BMCs standard ports: 7578, 5120, 5123
(unencrypted) or else 7582, 5124, 5127 (encrypted) for remote KVM, virtual CDROM, and
virtual USB/Floppy, respectively.
The client-side IP address and http/https port numbers are supplied automatically by the
browser and do not need to be configured.
Save button
Click to save any changes.