User Guide

Intel® Integrated BMC Web Console Options Intel® BMC And RMM4 User Guide
112 Intel order number H54847-001 Revision 2.8
7.3.11 Alerts Page
Use this page to configure which system events an alert should be sent for and the destination
for the alerts. Up to two destinations can be selected for each LAN channel. Figure 98 shows
the details for an S1200BTL system.
Figure 98: Configuration Alerts Page on S1200BTL Platforms
The following table lists the options allowing you to select the events that alerts should be
sent on and selection of where the alerts are to be sent.
Table 23: Configuration Alerts Options
Option Task
Select the events that will trigger alerts.
Select one or more system events that will trigger an alert.
Check/Clear All buttons
Click to select or clear all events.
LAN Channel to Configure
Select either the BMC or RMM4 to configure the destination.
Alert Destination #1/#2
Select either SNMP along with the IP address or email address that the alert
will be sent to. Up to two destinations can be selected for each LAN channel.