User Guide

Intel® Remote Management Module 4 Overview Intel® BMC And RMM4 User Guide

8 Intel order number H54847-001 Revision 2.8

Figure 2: Intel

Dedicated Server Management NIC

2.1.2 Intel

Server Boards and Systems Based on Intel

Xeon

Processor E5-2600 V3 --- S2600WT, S2600KP, S2600TP and

S2600CW

These platforms have a Dedicated Server Management NIC (DMN) on-board so only the Intel

RMM4 Lite is required to access the advanced management features.

The Intel

RMM4 Lite is a small board that unlocks advanced management features on the

RGMII interface when installed on Intel

Server Boards. It provides an increased level of

manageability over the basic server management available to the server board. It works as an

integrated solution on your server system. (Refer to Figure 1: Intel

RMM4 Lite)

After the Intel

RMM4 Lite has been installed, the advanced management features are

available through both on-board Intel

Dedicated Server Management NIC, and all of the on-

board Integrated BMC-shared NIC ports.

2.2 Intel

RMM4 Features

The Intel

RMM4 add-on offers convenient, remote KVM access and control through LAN or

Internet. It captures, digitizes, and compresses video and transmits it with keyboard and

mouse signals to and from a remote computer. Remote access and control software runs in

the Integrated Baseboard Management Controller, utilizing expanded capabilities enabled by

the Intel

RMM4 hardware.

Key features of the Intel

RMM4 add-on card are:

• KVM redirection from either the RMM4 NIC or the baseboard NIC used for

management traffic; up to two simultaneous KVM sessions.