User Guide

ManualsBrandsIntel ManualsOtherIntel Server Board S2600CP4

Hardware Installations and Initial Configuration Intel® BMC And RMM4 User Guide

14 Intel order number H54847-001 Revision 2.8

3.3.2 Installation of the Intel

Dedicated Server Management NIC on Intel

Xeon

Processor E5-4600/2600/2400/1600/1400 (v1&v2), S1200V3RP and

S1200BTL Product Families

For Intel

Server Boards and Systems Based on Intel

Xeon

Processor

E5-4600/2600/2400/1600/1400 (v1&v2), S1200V3RP and S1200BTL Product Families, the

Intel

Dedicated Server Management NIC module need to be installed.

The installation will vary between the chassis configurations. The following sections provide

installation instructions.

3.3.2.1 Installation of the Intel

Dedicated Server Management NIC on an Intel

Rack

Server System

Most Intel

Rack Server Systems allow the Intel

Dedicated Server Management NIC module to

be mounted to the chassis. Table 3 lists all Intel

Rack Server Systems that support a chassis

mounted Intel

Dedicated Server Management NIC module. Use the following steps when

installing the Intel

Dedicated Server Management NIC module on those server systems:

Note: For the next steps see your specific Intel

Server Systems Technical Product Specification

and Intel

Server Systems Service Guide for more details. Table 3 lists the section and figure

describing the installation for that specific system.

Table 3: Intel

Rack Server Systems – Intel

Dedicated Server Management NIC Connector Locations

Intel

Server

System

RMM4 NIC Connector

Reference Designator

Cable and Bracket

Required?

Section Figure

R1000BTL Family J5C1 Yes 3.3.2.1.1 Figure 6

R1000BB Family

R2000BB Family

J3B2 No 3.3.2.1.2 Figure 9

R1000EP Family J2B1 No 3.3.2.1.3 Figure 10

R1000RP Family J5C1 Yes 3.3.2.1.1 Figure 6

R1000SP Family J3B2 No 3.3.2.1.2 Figure 9

R2000FP Family J1D2 Yes (PCI slot bracket) 3.3.2.1.4 Figure 12

R2000IP Family J3A1 Yes 3.3.2.1.1 Figure 7

R2000LH2/R200LT2 J53 No 3.3.2.1.1 Figure 8

R2000SC Family J1C7 Yes (PCI slot bracket) 3.3.2.1.4 Figure 12

R1000GZ/GL Family

R2000GZ/GL Family

J2A1 No 3.3.2.1.2 Figure 9

3.3.2.1.1 Installing the Dedicated NIC on Intel

Server System R1000BTL Family,

R1000RP Family, R2000IP Family, or R2000LH2/R2000LT2

1. Ensure that AC power has been removed from the system and that you have waited at

least 30 seconds after removing power.