User Guide

Intel® BMC And RMM4 User Guide Hardware Installations and Initial Configuration
Revision 2.8 Intel order number H54847-001 15
2. Push out and remove the metal cover on the chassis where the NIC RJ-45 receptacle will
align.
Caution: Carefully remove the metal cover with pliers; directly removing it with fingers has
a potential risk.
3. Attach the metal fastening bracket to the Intel
®
Dedicated Server Management NIC module
as shown in Figure 4.
Figure 4: Attaching the Bracket to the Intel
®
Dedicated Server Management NIC Module
4. Attach the cable to the cable connector on the Intel
®
Dedicated Server Management NIC
module as shown in Figure 5.
Caution: Take care when attaching or removing this cable. Mishandling the cable could
cause damage.