User Guide

Hardware Installations and Initial Configuration Intel® BMC And RMM4 User Guide
16 Intel order number H54847-001 Revision 2.8
Figure 5: Attaching the Cable to the Intel
®
Dedicated Server Management NIC Module
5. Attach the cable to the cable connector on the Intel
®
Dedicated Server Management NIC
module. Mount the NIC module to the back of the chassis and secure the metal fastening
bracket with two screws. This will align the RJ-45 with the opening in the chassis. Attach
the cable to the RMM4 NIC connector, as specified in Table 3, on the server board.
Caution: Take care when attaching or removing this cable. Mishandling the cable could
cause damage.
Figure 6: Adding the Intel
®
Dedicated Server Management NIC Module in the Intel
®
Server System
R1000BTL and R1000RP Families