User Guide

Hardware Installations and Initial Configuration Intel® BMC And RMM4 User Guide
18 Intel order number H54847-001 Revision 2.8
3.3.2.1.2 Installing the Dedicated NIC on Intel
®
Server System R1000BB and R2000BB
Families, R1000SP Family, or R1000GZ/GL and R2000GZ/GL Families
1. Ensure that AC power has been removed from the system and that you have waited at
least 30 seconds after removing power.
2. Push out and remove the metal cover on the chassis where the NIC RJ-45 receptacle will
align.
Caution: Carefully remove the metal cover with pliers; directly removing it with fingers has
a potential risk.
3. Mount the NIC module to the Intel
®
Server System board and secure it to the standoffs
with two screws.
Figure 9: Adding the Intel
®
Dedicated Server Management NIC Module in the Intel
®
Server System
R1000BB and R2000BB Families, R1000SP Family, or R1000GZ/GL and R2000GZ/GL Families
4. Replace the chassis cover, attach the AC power, and connect a network cable to the Intel
®
Dedicated Server Management NIC module.