User Guide

Configuring the Integrated BMC Web Console and Intel® RMM4 Intel® BMC And RMM4 User Guide
32 Intel order number H54847-001 Revision 2.8
4. Configuring the Integrated BMC Web Console and
Intel
®
RMM4
This section discusses using the Server Utilities to enable your system to use the Integrated
BMC Web Console or the Intel
®
RMM4 from a new unconfigured state to an operational one.
When first powered on, by default, the Server Management BMC LAN and the Intel
®
RMM4
have a static IP address of 0.0.0.0.
The Server Management BMC LAN and the Intel
®
RMM4 can be configured in multiple ways:
• Using BIOS setup
• Using the Intel
®
Deployment Assistant (IDA)
• Using Sysconfig (SYSCFG)
• Using IPMI commands
Note: You can download the IDA and SYSCFG software from the following links:
• IDA – http://www.intel.com/p/en_US/support/highlights/server/ida – This is also
available on the resource disk that is shipped with the server board.
• SYSCFG – http://downloadcenter.intel.com/default.aspx > relevant server platforms
page
Two steps are necessary before Server Management BMC LAN or the Intel
®
RMM4 can be used:
1. One or both LAN channels must be configured as either DHCP or static addresses.
2. At least one user must be enabled to use the LAN channels.