User Guide

Configuring the Integrated BMC Web Console and Intel® RMM4 Intel® BMC And RMM4 User Guide
34 Intel order number H54847-001 Revision 2.8
Figure 25: Server Management – BMC LAN Configuration on S1200BTL
4.2 Configuring the Server Management NIC using BIOS Setup on
Intel
®
Server Boards and Systems Based on Intel
®
Xeon
®
Processor
E5-4600/2600/2400/1600/1400 (v1&v2) and S1200V3RP Product
Families
1. During POST, press <F2> to go to BIOS setup.
2. Navigate to the Server Management tab and then scroll down to BMC LAN Configuration.
Press <Enter>.
3. If you will be using an IPv4 network:
a. If configuring your Server Management BMC LAN, scroll to Baseboard LAN
configuration > IP source and then select either Static or Dynamic.
b. If configuring your Intel
®
RMM4, scroll down to Intel(R) RMM4 IPV4 LAN configuration
> IP source and then select either Static or Dynamic.
c. If Static is selected, configure the IP address, Subnet mask, and Gateway IP as
needed.