User Guide

Intel® BMC And RMM4 User Guide Configuring the Integrated BMC Web Console and Intel® RMM4
Revision 2.8 Intel order number H54847-001 37
c. If Static is selected, configure the IP address, Subnet mask, and Gateway IP as
needed.
5. If you will be using an IPv6 network:
a. If configuring your Server Management BMC LAN, scroll to Baseboard LAN IPv6
configuration > IP source and then select Enabled.
1. Scroll to IPV6 source and select either Static or Dynamic.
b. If configuring your Intel
®
RMM4, scroll down to Dedicated Management LAN IPv6
Configuration > IP source and then select either Static or Dynamic.
c. If Static is selected, configure the IPV6 address, Gateway IPV6, and IPV6 Prefix
Length as needed.
6. Navigate to User Configuration and then press <Enter>.
7. Scroll down to User ID. Select the user that you want to use.
8. Scroll down to User status. Select Enabled.
9. Scroll down to User name. Change the name as needed. Note that you cannot change
anonymous or root.
10. Scroll down to User password. Change the password. Note that you need to enter the
password twice.
11. When you finish configuring the LAN addresses and user information for the server, press
<F10> and select save and exit. Your server will reboot with the new LAN settings.