User Guide

Remote Console (KVM) Operation Intel® BMC And RMM4 User Guide
64 Intel order number H54847-001 Revision 2.8
3. Use number pad '+' or '-' keys to change the threshold settings until both cursors go out of
sync.
4. Detect the first reading at which the cursors go out of sync.
5. After the reading is detected, use Alt-T to save the threshold value.
6. In this step, the mouse acceleration settings on the remote server will be discovered. The
local mouse cursor is displayed in red color and the remote cursor is part of the remote
video screen. Both cursors will be out of sync in the beginning.
7. Use number pad '+' or '-' keys to change the acceleration settings in steps of 1, or use Alt-
'+' or Alt-'-' keys to change the acceleration settings in steps of 0.1 until both cursors are in
sync.
8. Detect the first reading at which the cursors are in sync.
9. After the reading is detected, use Alt-T to save the acceleration value.
6.3.4 Remote Console Options Menu
Figure 56: Remote Console Options Menu
Using this menu, you can do the following:
• Bandwidth. Changing the bandwidth setting affects low-level connection protocol
parameters such as fragment size and timeouts. If you experience performance
problems when operating over a slow connection such as a modem, the bandwidth
setting may need to be adjusted. Use the Auto Detect option to find the correct setting
for your connection.
• Keyboard/Mouse Encryption. Keyboard and mouse data is normally encrypted before
being sent over the connection, but this can be disabled for a small performance
increase.
6.3.5 Remote Console Device Menu
Figure 57: Remote Console Device Menu