Technical Product Specification

Intel® Remote Management Module 4 TPS Hardware Architecture
Revision 1.5 Intel order number G24513-005 15
RMII link to onboard shred NIC PHY and has a RGMII link to the Intel
®
Dedicated Server
Management NIC PHY for data and control .
4.3.3 128-MB DDR3 System Memory
The ServerEngines* Pilot III Baseboard Management Controller uses 128-MB DDR3 memory.
This memory supports running the embedded Linux operating system and all other
embedded firmware.
4.3.4 16-MB Flash
The embedded firmware includes the advanced features is stored in a 16-MB flash chip. This
is attached to the SPI0 of Integrated BMC .
4.3.5 RMM4 Lite 1-MB Flash
RMM4 Lite is key to enable the advanced features of ServerEngines* Pilot III Baseboard
Management Controller. RMM4 Lite has 1-MB Flash that connects to Integrated BMC SPI1.
4.4 Electrical Specification
4.4.1 RMM4 Lite Pin-outs
Table 3. RMM4 Lite Pin-outs
Pin
Signal Description
Pin
Signal Description
1 DI 2 VCC
3 CLK 4 KEY
5 GND 6 DO
7 GND 8 CS_N
4.4.1.1 Dedicated Management NIC (Only apply to Intel
®
Server Boards and Systems
Platforms Based on Intel
®
Xeon
®
Processor E5-4600/2600/2400/1600/1400
(V1 & V2), S1200V3RP and S1200BTL Product Families)
Table 4. DMN Docking Port (J1L1) Pin-outs
Pin Signal Description Pin Signal Description
1 3V3_AUX 2 MDIO
3 3V3_AUX 4 MDC
5 GND 6 TXD_0
7 GND 8 TXD_1
9 GND 10 TXD_2
11 GND 12 TXD_3
13 GND 14 TX_CTL
15 GND 16 RX_CTL