Hardware user's guide

4 Intel® Trusted Platform Module Hardware User’s Guide
Installing the TPM
To install the TPM, follow these steps:
1. Turn off the power to the system, all drives, enclosures, and system components.
Remove the power cord(s).
2. Remove the server cover. For instructions, see your server system documentation.
3. Insert the standoff into the hole in the server/workstation board and insert the TPM
connector into the connector in the board. To locate the TPM connector and the
hole on your server/workstation board, see your server/workstation board
documentation.
4. Press down gently but firmly to ensure that the module is properly seated in the
connectors, and then tighten the tamper resistant screw.