Safety and regulatory information

Intel® Product Safety and Regulatory Compliance
13
Intended Application Uses
This product was evaluated as Information Technology Equipment (ITE), which may be installed in offices,
schools, computer rooms, and similar commercial type locations. The suitability of this product for other
product categories and environments (such as medical, industrial, residential, alarm systems, and test
equipment), other than an ITE application, may require further evaluation.
Site Selection
The system is designed to operate in a typical office environment. Choose a site that is:
• Clean, dry, and free of airborne particles (other than normal room dust).
• Well-ventilated and away from sources of heat including direct sunlight and radiators.
• Away from sources of vibration or physical shock.
• Isolated from strong electromagnetic fields produced by electrical devices.
• In regions that are susceptible to electrical storms, we recommend you plug your system into a surge
suppresser and disconnect telecommunication lines to your modem during an electrical storm.
• Provided with a properly grounded wall outlet.
• Provided with sufficient space to access the power supply cord(s), because they serve as the
product's main power disconnect.
Equipment Handling Practices
Reduce the risk of personal injury or equipment damage:
• Conform to local occupational health and safety requirements when moving and lifting equipment.
• Use mechanical assistance or other suitable assistance when moving and lifting equipment.
• To reduce the weight for easier handling, remove any easily detachable components.
Power and Electrical Warnings
CAUTION
The power button, indicated by the stand-by power marking, DOES NOT completely turn off the system AC
power, 5V standby power is active whenever the system is plugged in. To remove power from system, you
must unplug the AC power cord from the wall outlet. Your system may use more than one AC power cord.
Make sure all AC power cords are unplugged. Make sure the AC power cord(s) is/are unplugged before you
open the chassis, or add or remove any non hot-plug components.
Do not attempt to modify or use an AC power cord if it is not the exact type required. A separate AC cord is
required for each system power supply.
The power supply in this product contains no user-serviceable parts. Do not open the power supply.
Hazardous voltage, current and energy levels are present inside the power supply. Return to manufacturer for
servicing.
When replacing a hot-plug power supply, unplug the power cord to the power supply being replaced before
removing it from the server.
To avoid risk of electric shock, turn off the server and disconnect the power cord, telecommunications systems,
networks, and modems attached to the server before opening it.