Safety and regulatory information

Intel® Product Safety and Regulatory Compliance
48
4. Intel
®
Server Chassis/System Regulatory Compliance and
Certification
WARNING
To help ensure Safety regulatory compliance of the final integrated product, you must adhere to the assembly
instructions in this guide to ensure and maintain compliance with existing product certifications and approvals.
Use only the described, regulated components specified in this guide. Use of other products / components will
void the UL and/or other National Recognized Test Laboratory (NRTL) Certification Listing and other regulatory
approvals; this will most likely result in noncompliance with product regulations in the region(s) in which the
product is sold.
To help ensure EMC compliance with your local regional rules and regulations, before computer integration,
make sure that the chassis, power supply, and other modules have passed EMC testing using a server board
with a microprocessor from the same family (or higher) and operating at the same (or higher) speed as the
microprocessor used on the server board.
IMPORTANT COMPLIANCE NOTICE:
Final EMC, Safety and Environmental compliance and testing may be required of the final integrated
server platform configured using Intel Server building blocks. It is the responsibility of the final
integrator and representatives placing product into the market place to ensure compliance is
maintained when any additional components and/or parts are added.
For more information on Final Compliance and Testing please contact your local Intel Representative.
Energy Star Compliance Notice:
Energy Star compliance is determined at the fully integrated system level. It is highly dependent on the
system’s final configuration including processors, memory, and peripherals, and on the specific usage model.
Intel completes Energy Star compliance pretesting on its server boards and systems, but it is the responsibility
of the customer/final system integrator to submit fully integrated server systems for Energy Star testing and
certification.
4.1 Product Regulatory Compliance
Intel’s server chassis and system component level products have been tested and comply to the following
safety, electromagnetic compatibility (EMC), and product environmental regulations and requirements.
Intended Application – The server chassis and system component products are evaluated as Information
Technology Equipment (ITE), which may be installed in offices, schools, computer rooms, and similar
commercial type locations. The suitability of this product for other product categories and environments (such
as: medical, industrial, telecommunications, NEBS, residential, alarm systems, test equipment, etc.), other
than an ITE application, may require further evaluation.
4.1.1 Product Safety Compliance
UL60950 – CSA 60950(USA / Canada)
EN60950 (Europe)
IEC60950 (International)
CB Certificate & Report, IEC60950 (report to include all country national deviations)
GS Certification (Germany)
GOST R 50377-92 - Certification (Russia)
Ukraine Certification (Ukraine)
CE - Low Voltage Directive 2006/95/EC (Europe)
IRAM Certification (Argentina)