Safety and regulatory information

Intel® Product Safety and Regulatory Compliance

English translation of the notice above:

This is a Class A product based on the standard of the Voluntary Control Council for Interference (VCCI) from

Information Technology Equipment. If this is used near a radio or television receiver in a domestic

environment, it may cause radio interference. Install and use the equipment according to the instruction

manual.

4.5.5 BSMI (Taiwan)

BSMI EMC Notice

4.5.6 KC (Korea)

Korea EMC Certification requires the additional information on the product. If there is no room to place the

information it information is provided in this product literature

1. Type of Equipment (Model Name): Model name is on KC Certificate marked on product

2. Certification No.: Certification number is on KC certificate and marked on product

3. Name of Certification Recipient: Intel Corporation name is on KC Certificate marked on product

4. Date of Manufacturer: Date of manufacturer is a part of date code serial number on product

5. Manufacturer/Nation: Country of origin marked on product

4.6 Regulated Specified Components

To maintain the NRTL (e.g. UL, Intertek ETL or NEMKO CCL) Listing and compliance to other regulatory

certifications and/or declarations, the following regulated components must be used and conditions adhered to.

Interchanging or use of other component will void the NRTL listing and other product certifications and

approvals.

Updated product information for configurations can be found on the Intel Server Builder Web site at the

following URL:

http://channel.intel.com/go/serverbuilder.

If you do not have access to Intel’s Web address, please contact your local Intel representative.

• Intel Server Chassis: base chassis with power supply is NRTL listed.

• Intel Server Board: base chassis to be integrated with Intel NRTL recognized board

• Add-in Boards:

• Printed Wiring Board flammability requires minimum V-1 rating.

• Any add-in boards containing external power connectors (e.g. USB, Video, etc) and/or lithium

batteries must be UL recognized or UL listed.

• Any add-in board containing modem telecommunication circuitry must be UL Listed. In addition,

the modem must have the appropriate telecommunications, safety, and EMC approvals for the

region in which it is sold.

• Peripheral Storage Devices:

• Requires being UL recognized or UL listed accessory

• Requires being TUV or VDE Certified.