Safety and regulatory information

Intel® Product Safety and Regulatory Compliance
57
5. Intel
®
RAID Card Regulatory Compliance
Intel’s RAID products typically have a variety of individual component level certifications; however final
regulatory compliance is based on the combination of the RAID card being integrated within an Intel system
product. For combination regulatory compliance please refer to Product Regulatory Compliance for Intel’s
Server Chassis/System.
Intended Application – The RAID products are evaluated as Information Technology Equipment (ITE), which
are intended to be integrated into Intel system products that will be installed in offices, schools, computer
rooms, and similar commercial type locations. The suitability of this product for other product categories and
environments (such as: medical, industrial, telecommunications, NEBS, residential, alarm systems, test
equipment, etc.), other than an ITE application, may require further evaluation.
IMPORTANT COMPLIANCE NOTICE:
Final EMC, Safety and Environmental compliance and testing may be required of the final integrated
server platform configured using Intel Server building blocks. It is the responsibility of the final
integrator and representatives placing product into the market place to ensure compliance is
maintained when any additional components and/or parts are added.
For more information on Final Compliance and Testing please contact your local Intel Representative.
5.1 Electromagnetic Compatibility Notices
For Intel RAID products which have individual EMC compliance approvals the following EMC Compatibility Notices
may apply. Otherwise the EMC Compatibility Notices for Intel Server Chassis / System products apply based on the
combination regulatory compliance (refer to EMC Compatibility Notices for Intel Server chassis /system products).
5.1.1 FCC Verification Statement (USA)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Intel Corporation
5200 N.E. Elam Young Parkway
Hillsboro, OR 97124-6497
Phone: [phone]
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation.