Server Management Guide
Server Management Software and Utilities
64 Intel
®
Server Boards and Server Platforms Server Management Guide
Discovery Configuration Wizard detects networked Intel
®
Modular server systems.
Displays the health and alerts from Intel
®
Modular Server Compute Modules.
Supports launching the Intel
®
Modular Server Control Software web-based console.
For detailed information on usage of Intel
®
Module Server Management Pack, refer to the Intel
®
Modular Server Management Pack User Guide.
4.5.3.3 Intel
®
AMT Management Pack
Intel
®
AMT Management pack is used to manage AMT enabled Intel
®
Desktop systems.
For detailed information on usage of Intel
®
AMT Management pack, you have to refer to Intel
®
AMT
Management pack User Guide.
4.5.4 Intel
®
Command Line Interface
The Intel
®
Command Line Interface console, called dpccli, runs on the management console and
enables communication between the management console and the network proxy, which in turn
communicates to the managed server.
The Intel
®
Command Line Interface uses a network proxy (dpcproxy) that runs on the managing client
system or on a central network proxy. The network proxy is installed by the Intel
®
System
Management Software installation program provided with your Intel
®
server.
4.5.4.1 DPCCLI Features and Benefits
The Intel
®
Command Line Interface lets you control a server from the command line rather than from a
graphical user interface. You can enter Intel
®
Command Line Interface commands at a command
prompt or from a script file to do the following:
Remotely power on or off a server
Remotely reset the server
Request machine identifiers
Read sensor values
Display the network configuration of the BMC
IPMI 1.0, 1.5 and 2.0 authentication support
Packet encryption based on IPMI version
You can use any of the following consoles to launch dpccli or telnet and issue Intel
®
Command Line
Interface commands:
The Microsoft Window’s command-line environment (command prompt)
A Linux* command shell
4.5.4.2 Using DPCCLI
The Intel
®
Command Line Interface tool has two modes: Platform Control mode and Serial Over LAN
(SOL) Console Redirection mode.