Server Management Guide

Scenarios and Best Practices
Intel
®
Server Boards and Server Platforms Server Management Guide 83
Figure 42. Intel
®
DPCCLI Installation
If you are installing DPCCLI on Microsoft Windows 2008* system, you must enable telnet service in
your management console.
5.4.3 Remote manage server by DPCCLI
You must first complete the steps detailed in section 5.2 or 5.4 to enable the BMC for OOB and SOL
connection. Then, you can connect the managed server using DPCCI.
You can use Telnet to remotely manage the server. When using telnet to connect to the remote server
(that is, to issue Intel
®
DPCCLI commands and to operate in SOL mode), you must connect the telnet
session to the dpcproxy by specifying (in the telnet command line) the port on which dpcproxy is
listening as follows:
On the management system, double-click the Telnet Localhost 623 desktop icon.
You will now able to connect to the managed server
At the server prompt, type the assigned Integrated BMC IP Address that you previously
configured (for example: Server: xxx.xxx.xxx.xxx).
At the username prompt, press the <Enter> key.
You are logging in under the anonymous user account. No user name is assigned.
At the password prompt, enter “password”.
This password was assigned when you configured BMC OOB function.
“Login successful” should be displayed on your screen.