Software User Guide for Windows*

RAID OpROM Utility
Intel
®
RSTe for Microsoft Windows* OS Software User’s Guide 25
Figure 17. Reset Disks to Non-RAID
2. Use <Up> and <Down> arrow keys to select the target disk, and press <Space> key to mark the disk
with a green mark on left side of its port number. Press <Enter> key to reset this disk. A question will
pop up at lower side of the screen.
Figure 18. Select Target Disk to Reset
3. When confirmed, press <Y> to go on resetting this disk to Non-RAID mode. After this, if system
detects both a Degrade volume and disk available for rebuilding, a Degraded Volume Detected
window will pop up, asking for selecting a disk to initiate a rebuild.