Software User Guide for Windows*

Operating Systems Installation and Driver Update
Intel
®
RSTe for Microsoft Windows* OS Software User’s Guide 39
4. Watch for the message Press F6 if you need to install a third party SCSI or RAID driver and press <F6>
quickly. If you forget to press <F6> or press it too late, the following installation steps will fail.
Figure 42. Press F6 to Install SCSI/RAID Driver
5. Then the Microsoft Widows Setup* will automatically load the files. Watch for the installer to prompt
you for the specific drivers. If you don’t see this prompt, you must have missed the <F6> prompt in the
previous step; restart your system and try again.
a) Insert your floppy disk (it can be left in the drive during boot, but make sure you don’t boot from
the floppy disk).
b) Press <S> to get to the driver selection screen.
Figure 43. Press S to Specify Special Disk Controller