Software User Guide for Windows*

Graphic User Interface Utility in Operating Systems
60 Intel
®
RSTe for Microsoft Windows* OS Software User’s Guide
also two SATA drives directly attached to the first two ports of the Intel
®
C600 chipset based controller, and
an expander connected to the last four ports of the Intel
®
C600 chipset based controller.
1. Create 2 Drive RAID 1 Boot Volume
The following example steps through the process of turning a single Boot disk into a 2 drive RAID 1 boot
volume:
1. Click Create Volume to begin the process.
Figure 81. Create New Volume
2. Select the Intel
®
C600 series chipset SATA RAID Controller, then select Real-time data protection
(RAID1). Finally click Next to continue.
Figure 82. Select Controller and Volume Type