Software User Guide for Windows*

Graphic User Interface Utility in Operating Systems
64 Intel
®
RSTe for Microsoft Windows* OS Software User’s Guide
3. To configure the volume, you can first specify the Name of the volume. In this example it has been
named RAID0_DataVolume. Then select the two drives to be included in the volume. Notice that for
Do you want to keep data from one of the selected disks question, No has already been selected. The
Yes option may be selected if desired. Under the Volume Size, the option to specify the size of the
RAID volume is available. Under the Advanced tab you can specify the Data stripe size and/or select
Enable volume write-back cache. Once all of the desired options have been selected, click Next to
continue.
Figure 89. Configure New Volume
4. Under Confirm Volume Creation, select Proceed with deleting data (if the option appears). Otherwise,
click Create Volume to continue the process.
Figure 90. Confirm New Volume Creation