Software User Guide for Windows*

UEFI based RCFGSCU and RCFGSATA Utility
Intel
®
RSTe for Microsoft Windows* OS Software User’s Guide 79
7 UEFI based RCFGSCU and RCFGSATA Utility
The UEFI based RCFGSCU and RCFGSATA are end user command line utilities used to do basic RAID
operations on Intel
®
RSTe enabled systems. Intel
®
RSTe supports RAID0, RAID1, RAID5, and RAID10
volumes. RSTCLI supports creating RAID volumes through the Create mode and managing RAID volumes
through the Manage mode. In addition there are miscellaneous options such as Help, Status, and Version.
To use the UEFI based RCFGSCU and RCFGSATA, EFI Optimized Boot option must be enabled in server
board BIOS SETUP > Boot Option > EFI Optimized Boot.
Figure 106. Enable EFI Optimized Boot in BIOS Setup
After above step, ensure to insert a USB key with RCFGSCU and RCFGSATA included to the USB port
on the server system. Enter UEFI Shell, go to the directory where the utilities are located, and run these
commands.
7.1 RCFGSCU Utility Usage
RCfgScu.efi [/?] [/Y] [/Q] [/C:vol_name] [/SS:strip_size] [/L:raid_level] [/S:vol_size]
[/DS:disk_ports] [/D:vol_name] [/X] [/I] [/P] [/U] [/ST] [/SP] [/V]
/? Display Help Screen. Other options ignored.
/Y Suppress any user input. Used with options /C, /D, /SP, and /X.
/Q Quiet mode / No output. Should not be used with status commands.