Software User Guide for Windows*

UEFI based RCFGSCU and RCFGSATA Utility

80 Intel

RSTe for Microsoft Windows* OS Software User’s Guide

COMMANDS - Only one at a time unless otherwise specified.

/C Create a volume with the specified name. /S, /DS, /SS, and /L can be specified along with /C.

/SS Specify strip size in KB. Only valid with /C.

/L Specify RAID Level (0, 1, 10, or 5). Only valid with /C.

/S Specify volume size in GB or percentage if a '%' is appended. Percentage must be between 1 and

100. Only valid with /C.

/DS Select the disks to be used in the creation of volume. List should be delimited by spaces.

/D Delete Volume with specified name.

/X Remove all metadata from all disks. Used with /DS to delete metadata from selected disks.

/I Display All Drive/Volume/Array Information. /P can be specified.

/P Pause display between sections. Only valid with /I or /ST.

/U Do not delete the partition table. Only valid with /C on RAID 1 volumes.

/SP Mark the selected drive(s) as spare(s). Used with /DS.

/ST Display Volume/RAID/Disk Status.

/V Display version information.

7.2 RCFGSATA Utility Usage

RCfgsata.efi (or named as RFfgsata.efi) [/?] [/Y] [/Q] [/C:vol_name] [/SS:strip_size] [/L:raid_level]

[/S:vol_size]

[/DS:disk_ports] [/D:vol_name] [/X] [/I] [/P] [/U] [/ST] [/SP] [/V] [/Sync]

[/M] [/EM] [/ER] [/ACCEL] [/RA] [/SD]

/? Displays Help Screen. Other options ignored.

/Y Suppress any user input. Used with options /C, /D, /SP, and /X.

/Q Quiet mode / No output. Should not be used with status commands.