Specification update

Intel® Server Boards & Systems Monthly Specification Update

Workaround Select another page in the Integrated BMC Web Console and then return to the

Power Control Page. The Perform Action button will then be available.

14. IPMI Get Chassis Status command returns incorrect Chassis Identify

State.

Problem When a Get Chassis Status command is issued, after the Chassis Identify LED

has been forced on, the status of off (00b) is returned for Chassis Identify State

(response data byte 4 – bits [5:4]).

Implication Unable to correctly read when the Chassis Identify LED is on.

Status This issue is fixed in BMC release 1.10 and later version

Workaround None.

15. The BIOS and ME Firmware can't be updated successfully via Intel® One

Boot Flash Update Utility(OFU) under SuSE Linux Enterprise Server 11*

(64-bit) with SP2

Problem OFU will fail to update BIOS & ME under SuSE Linux Enterprise Server 11*

(64-bit) with SP2 Operating System.

Implication If the system is running SuSE Linux Enterprise Server 11* (64-bit) with SP2

Operating System, using OFU to update System Firmware Update

Package(SFUP) will fail.

Status This issue is fixed in OFU Version 11.0 Build 8.

Workaround Update System Firmware Update Package(SFUP) from EFI environment using

iFlash32, FWPIAUpdate and FRUSDR Utility

16. BMC continuously sends HDD assert/de-assert event during HDD RAID

rebuild under ESRT2 mode of the SCU controller

Problem HDD fault will keep asserting and de-asserting frequent during RAID rebuild

under ESRT2

Implication During HDD ESRT2 RAID rebuild, there's flood HDD fault assert/deassert(SAS

RAID) or Rebuild/remap (SATA RAID) logs into SEL.

Status This issue is fixed in ESRT2 driver release 15.00.0528.2012 and later version

Workaround None.