Specification update

Intel® Server Boards & Systems Monthly Specification Update
11
Status The issue is fixed with ESRT2 driver 15.00.0927.2012.
Workaround None.
20. System may detect unrecognized sensors
Problem Prior to updating the sytem with the FRU/SDR package, the system may
detect unrecognized sensors.
Implication The system may have additional System Event Log (SEL) for the unrecoginzed
sensors being detected, system status LED may turn amber and system FAN
may boost.
Status The issue may be fixed in a future firmware release.
Workaround Update the system with FRU/SDR package
21. Intel
®
LAN driver installation failure on Windows* 7
Problem The Intel
®
LAN driver version 16.8 and below may not be installed sucessfully
on Windowns* 7 with the .bat installation scripts in the driver package.
Implication The LAN driver can not be installed by the .bat installation scripts in the driver
package.
Status The issue is fixed in Intel
®
LAN driver version 17.1
Workaround Two workarounds are availalbe:
1. The LAN driver can be manually installed.
2. User can lower the “User Account Control” to “Never Notify”, then the driver
can be installed with the .bat installation scripts.
22. Hard drives connected through SAS expander can’t be detected in
legacy mode
Problem If hard drives are connected through expander to SCU ports and configured
under RSTe mode, the hard drives can’t be detected by system in legacy mode
(default BIOS setting).
Implication Users can’t use the hard drives connected through expander as boot device to
install OS. But users can install OS to other hard drives which are not
connected through expander and load RSTe driver to make the hard drives
connected through expander visible to OS. Or users can change Boot Options -
> EFI Optimized Boot to “Enabled” in BIOS Setup so that hard drives
connected through expander can be detected by the system.
Status This issue was fixed in BIOS 01.08.0003 and later release.