Specification update

Intel® Server Boards & Systems Monthly Specification Update
IV
25. Integrated BMC Web Console – Sensor Readings Page – Memory Throttling
sensor status will stay “Critical” once triggered ...................................................................... 12
26. WOL (Wake on LAN) may not function under Red Hat* Linux 6.2 64bit OS ......... 12
27. System only reports the first occurrence of power redundancy loss ..................... 13
28. BMC will generate flood event log and send PEF continuously ............................ 13
29. System BIOS may report POST error code 0x146 with the Intel® Xeon Phi™
Coprocessor installed ............................................................................................................ 14
30. The Intel® Xeon® Phi™ Coprocessor PCI Express* Card Status Sensor may
show "Unknown" .................................................................................................................... 14
31. The Intel® Xeon® Phi™ Coprocessor PCI Express* Card sensors numbering may
not be consistent with riser slot numbering ............................................................................ 14
32. Reported processor frequency is lower than expected when the BIOS setup option
EIST is disabled and the system is also in idle mode. ............................................................ 15
33. When using the 3ware® RAID controller cards, the system may hang after creating
RAID logic volume with BIOS R02.01.0002 or R02.02.0002. ................................................. 15
Documentation Changes ........................................................................................................ 16