Technical product specification

Intel® Server Board S2600CP Connector/Header Locations and Pin-outs
Intel
®
Server Board S2600CP and Server System P4000CP TPS
Revision 1.8
Intel order number G26942-005
94
7.3.7 HSBP_I
2
C Header
Table 38. HSBP_I
2
C Header Pin-out
Pin
Signal Name
1
SMB_HSBP_3V3STBY_DATA
2
GND
3
SMB_HSBP_3V3STBY_CLK
7.3.8 HDD LED Header
The server board includes a 2-pin hard drive activity LED header used with some SAS/SATA
controller add-in cards. The header has the following pin-out.
Table 39. HDD LED Header Pin-out
Pin
Signal Name
Pin
Signal Name
1
LED_HDD_ACT_N
2
NA
7.3.9 Internal Type- A USB Connector
The server board includes one internal Type-A USB connector. The following table provides the
pin-out for this connector.
Table 40. Type-A USB Connector Pin-out
Pin
Signal Name
Pin
Signal Name
1
P5V
2
USB2_P2_F_DN
3
USB2_P2_F_DP
4
GND
7.3.10 Internal eUSB SSD Header
The server board includes one 10-pin internal eUSB header with an intended usage of
supporting USB SSD devices. The following table provides the pin-out for this connector.
Table 41. eUSB SSD Header Pin-out
Pin
Signal Name
Pin
Signal Name
1
5V
2
NC
3
USB2_PCH_P12_DN
4
NC
5
USB2_PCH_P12_DP
6
NC
7
GND
8
NC
9
Key
10
LED_HDD_ACT_ZEPHER_N
7.4 Management and Security Connectors
7.4.1 RMM4_Lite Connector
A 7-pin Intel
®
RMM4 Lite connector is included on the server board to support the optional Intel
®
Remote Management Module 4. There is no support for third-party management cards on this
server board.