Technical product specification

Intel® Server Board S2600CP and Server System P4000CP TPS
Intel® Server Board S2600CP and Intel® Server System P4000CP Platform Management
Revision 1.8
Intel order number G26942-005
61
6.1.2 Basic and Advanced Features
The bellowing table lists basic and advanced feature support. Individual features may vary by
platform. See the appropriate Platform Specific EPS addendum for more information.
Table 14. Basic and Advanced Features
Feature
Basic
Advanced
IPMI 2.0 Feature Support
X
X
In-circuit BMC Firmware Update
X
X
FRB 2
X
X
Chassis Intrusion Detection
X
X
Fan Redundancy Monitoring
X
X
Hot-Swap Fan Support
X
X
Acoustic Management
X
X
Diagnostic Beep Code Support
X
X
Power State Retention
X
X
ARP/DHCP Support
X
X
PECI Thermal Management Support
X
X
E-mail Alerting
X
X
Embedded Web Server
X
X
SSH Support
X
X
Integrated KVM
X
Integrated Remote Media Redirection
X
Lightweight Directory Access Protocol (LDAP)
X
X
Intel
®
Intelligent Power Node Manager Support
X
X
SMASH CLP
X
X
6.1.3 Integrated BMC Hardware: Emulex* Pilot III
6.1.3.1 Emulex* Pilot III Baseboard Management Controller Functionality
The Integrated BMC is provided by an embedded ARM9 controller and associated peripheral
functionality that is required for IPMI-based server management. Firmware usage of these
hardware features is platform dependent.
The following is a summary of the Integrated BMC management hardware features that
comprise the BMC:
 400MHz 32-bit ARM9 processor with memory management unit (MMU)
 Two independent10/100/1000 Ethernet Controllers with Reduced Media Independent
Interface (RMII)/Reduced Gigabit Media Independent Interface (RGMII) support
 DDR2/3 16-bit interface with up to 800 MHz operation
 16 10-bit ADCs
 Sixteen fan tachometers
 Eight Pulse Width Modulators (PWM)
 Chassis intrusion logic
 JTAG Master