Technical product specification

Intel
®
Server Board S2600CP and Server System P4000CP TPS
Intel® Server Board S2600CP and Intel® Server System P4000CP Platform Management
Revision 1.8
Intel order number G26942-005
77
 IP Address: Static
 All users disabled
IPMI-enabled network interfaces may not be placed on the same subnet. This includes the
Intel
®
Dedicated Server Management NIC and either of the BMC’s embedded network
interfaces.
Host-BMC communication over the same physical LAN connection – also known as “loopback”
– is not supported. This includes “ping” operations.
On baseboards with more than two onboard NIC ports, only the first two ports can be used as
BMC LAN channels. The remaining ports have no BMC connectivity.
Maximum bandwidth supported by BMC LAN channels are as follows:
 BMC LAN 1 (Baseboard NIC port) ----- 100M (10M in DC off state)
 BMC LAN 2 (Baseboard NIC port) ----- 100M (10M in DC off state)
 BMC LAN 3 (Dedicated NIC) ----- 100M
6.4.3.5 Dedicated Management NIC MAC Address
Intel
®
Server Board S2600CP has up to seven MAC addresses assigned to it at the Intel
®
factory. The printed MAC address is assigned to NIC1 on the server board.
There will be seven MAC addresses assigned as follows for Intel
®
Server Board S2600CP4:
 NIC 1 MAC address (for OS usage)
 NIC 2 MAC address = NIC 1 MAC address + 1 (for OS usage)
 NIC 3 MAC address = NIC 1 MAC address + 2 (for OS usage)
 NIC 4 MAC address = NIC 1 MAC address + 3 (for OS usage)
 BMC LAN channel 1 MAC address = NIC1 MAC address + 4
 BMC LAN channel 2 MAC address = NIC1 MAC address + 5
 BMC LAN channel 3 (RMM) MAC address = NIC1 MAC address + 6
There will be five MAC addresses assigned as follows for Intel
®
Server Board S2600CP2:
 NIC 1 MAC address (for OS usage)
 NIC 2 MAC address = NIC 1 MAC address + 1 (for OS usage)
 BMC LAN channel 1 MAC address = NIC 1 MAC address + 2
 BMC LAN channel 2 MAC address = NIC 1 MAC address + 3
 BMC LAN channel 3 (RMM) MAC address = NIC1 MAC address + 4
6.4.3.6 IPV6 Support
In addition to IPv4, Intel
®
S2600CP Server Board support IPv6 for manageability channels.
Configuration of IPv6 is provided by extensions to the IPMI Set and Get LAN Configuration
Parameters commands as well as through a Web Console IPv6 configuration web page.