Service Guide

14 Intel
®
Server System SR1695WB Service Guide
Back Panel Connectors
Figure 7. Back Panel Connectors
Note: The Intel
®
Server System SR1695WB requires the use of shielded LAN cable to comply
with Emission/Immunity regulatory requirements. Use of non-shield cables may result in
product non-compliance.
The NIC LEDs at the right and left of each NIC provide the following information.
A. NIC1 connector with USB
ports 2, 5
B. USB ports 8, 9
C. NIC2 connector D. RJ-45 Serial B port
E. Internal Video Connector
AF003217
A
B C D E
Table 3. NIC LED Descriptions
LED
LED
State
LED State Description
NIC1/
NIC2
Left
LED
Off No network connection
Solid Amber Network connection in place
Blinking Amber Transmit/receive activity
Right
LED
Off 10 Mbps connection (if left
LED is on or blinking)
Solid Amber 100 Mbps connection
Solid Green 1000 Mbps connection