SEL Troubleshooting Guide

Hot Swap Controller Events System Event Log Troubleshooting Guide for Intel® S5500/S3420 Series Server Boards
82 Intel order number G74211-002 Revision 1.1
Byte
Field
Description
02h = Drive Slot 0 Status
03h = Drive Slot 1 Status
04h = Drive Slot 2 Status
05h = Drive Slot 3 Status
06h = Drive Slot 4 Status
07h = Drive Slot 5 Status
02h = Drive Slot 0 Status
03h = Drive Slot 1 Status
04h = Drive Slot 2 Status
05h = Drive Slot 3 Status
06h = Drive Slot 4 Status
07h = Drive Slot 5 Status
08h = Drive Slot 6 Status
09h = Drive Slot 7 Status
13
Event Direction and
Event Type
[7] Event direction
0b = Assertion Event
1b = Deassertion Event
[6:0] Event Type = 6Fh (Sensor Specific)
14
Event Data 1
40h = Failed Drive
15
Event Data 2
Not used
16
Event Data 3
Not used
12.2.1 HSC Drive Slot Status Sensor – Next Steps
If during normal operation a drive gets reported as failed, ensure that the drive was seated properly and the drive carrier was properly latched.
If that does not work, replace the drive.
12.3 HSC Drive Presence Sensor
The HSC Drive Slot Presence sensor provides the current presence state for the drive in each of the slots. After an AC power cycle there will
be a SEL entry to report the presence of the drive in a slot and there will be another entry for any changes in the presence of drives after that.