Technical Product Specification

Intel® Server System SC5650HCBRP TPS 6-HDD Expander SAS Hot Swap Backplane

Revision 1.2

Intel order number E81443-002

5.1.7 Clock Generation and Distribution

The 6-HDD Expander SAS HSBP HSBP provides one clock source. A 75-MHz oscillator

provides the clock to the VSC7161* SAS Expander.

5.1.8 IPMB Header - IPMB

The following table defines the pin-out of the 4-pin IPMB Header.

Table 63. IPMB Header Pin-out

Pin Signal Name Description

1 SMB_IPMB_5V_DAT Data

2 GND GND

3 SMB_IPMB_5V_CLK Clock

4 SMB_IPMB_5V_ADDR IPMI interface address selection. Primary (Low) = 0xC0, Secondary (High) = 0xC2

5.1.9

Active Hot-swap Backplane (HSBP) Cables Explained

Expander backplanes ship with only one cable (IPMB). You should use this cable in the

following manner:

5.1.9.1 IPMB Cable

 Always Installed, connect the white 4-pin IPMB connector on the HSBP to the white 4-

pin IPMB connector on the motherboard.

 If using one HSBP (Primary), connect the cable to HSBP_A on the motherboard.