Technical Product Specification

Functional Architecture Intel® Server System SC5650HCBRP TPS

Revision 1.2

Intel order number E81443-002

Figure 22. Integrated BMC Hardware

3.7.1 BMC Embedded LAN Channel

The BMC hardware includes two dedicated 10/100 network interfaces.

Interface 1: This interface is available from either of the available NIC ports in system that can

be shared with the host. Only one NIC may be enabled for management traffic at any time. The

default active interface is onboard NIC1.

Interface 2:

This interface is available from Intel

Remote Management Module 3 (Intel

RMM3), which is a dedicated management NIC and not shared with the host.

For these channels, you can enable support for IPMI-over-LAN and DHCP.

For security reasons, embedded LAN channels have the following default settings:

 IP Address: Static

 All users disabled

IPMI-enabled network interfaces may not be placed on the same subnet. This includes the

Intel

RMM3’s onboard network interface and either of the BMC’s embedded network interfaces.