Report

Errata and Contingencies Intel® Server SE7520BD2SCSI
12 November 2, 2004
Testing Exceptions for Intel® Server SE7520BD2SCSI Windows Server 2003
Data in this section reflects product data and test exceptions listed in section 2 of the Intel® Server
SE7520BD2SCSI Readme file at time of WLP First-Time submission ID Number 903073.
Operating system
(Windows XP, Windows 2000, etc.)
Failure type
(Contingency, Errata, Incident)
ID number
Errata 670
Failing test name
PCI Pre-OS Tests:
PCI Configuration Header Dump test; Pcidump.log
PCI Power Management Register Interface test; Pcicap.log
Subsystem ID and Subsystem Vendor ID test; Pcisid.log
PCI Test Adapter Diagnostic test; Pmdiag.log
PME# Signal Routing test; Pcipme1.log
PME# Signal Routing - Simultaneous test; Pcipme2.log
PCI 3.3 Volt Auxiliary Power Load test; Pcivaux.log
System Wake Up test; Pciwake.log
PCI Voltage Requirement test; Pcivolt.log
PCI Voltage Requirement - 3.3 Vaux test; Pcivoltz.log
S3 Compliance test; S3test.log
Applicable error message
(Type N/A if the error message
or failing text is excessive or if
there is no text)
Additional information
(for example, test system in a
multiple system configuration)
PCI Pre-OS tests that use FoxFire cards are no longer required
Operating system
(Windows XP, Windows 2000, etc.)
Failure type
(Contingency, Errata, Incident)
ID number
Windows 2003 Enterprise
Edition
Errata 860
Failing test name
Enable/Disable - Device I/O
Applicable error message
(Type N/A if the error message
or failing text is excessive or if
there is no text)
|ID=PCI\VEN_8086&DEV_24D2&SUBSYS_34398086&REV_02\3&267A616A&0&E8
|Friendly Name=(null)
|Status=25175040 Prob=22
|Status=DN_HAS_PROBLEM,DN_DISABLEABLE,DN_NT_ENUMERATOR,DN_NT_DRIV
ER,
|Prob=CM_PROB_DISABLED
TEST 3 :FAIL
Additional information
(for example, test system in a
multiple system configuration)
Enable/Disable – Device I/O test fails on USB 2.0 host controllers