Report
S5000PSLROMBR Errata and Contingencies
July 22, 2008 13
Additional information
(for example, test system in a
multiple system configuration)
Operating system
(Windows XP, Windows 2000, etc.)
Failure type
(Contingency, Errata, Incident)
ID number
Windows Server 2008 Errata 1115
Failing test name
PCI Hardware Compliance Test
Applicable error message
(Type N/A if the error message
or failing text is excessive or if
there is no text)
PCI Compliance - Bit 3 (Read Completion Boundary) in the Link
Control register (offset 10h) in the PCI Express Capability table
must be read-only and always return 0 for switch ports.
RESOLUTION: The following PCI Compliance assertion failure is
allowed 9A275B03-1072-43D6-B034-3DD306D2432
Additional information
(for example, test system in a
multiple system configuration)
Operating system
(Windows XP, Windows 2000, etc.)
Failure type
(Contingency, Errata, Incident)
ID number
Windows Server 2008 Errata 331
Failing test name
PCI Hardware Compliance Test
Applicable error message
(Type N/A if the error message
or failing text is excessive or if
there is no text)
PCI Compliance - Bit range 31:2 (Message Address)in the Message Address
register (offset 4h) in the MSI Capability table must be read-writable.
RESOLUTION: The following PCI Compliance test assertion failure is
allowed DDC8A893-6F85-4D69-BC79-874BA52E0A02
Additional information
(for example, test system in a
multiple system configuration)
Operating system
(Windows XP, Windows 2000, etc.)
Failure type
(Contingency, Errata, Incident)
ID number
Windows Server 2008 Errata 1080
Failing test name
PCI Hardware Compliance Test
Applicable error message
(Type N/A if the error message
or failing text is excessive or if
there is no text)
PCI Compliance test causes the system to hang after testing Power
Management capability of the graphics devices. This occurs after
the device are put into various D-states and then recovered to D0
state. Cause: The AMD/ATI graphics devices require that the
VBIOS be re-posted after transition to various D-states and
recovery to D0 state which the PCIHCT doesn't do.
Additional information
(for example, test system in a
multiple system configuration)