Report

Errata and Contingencies Intel® Server Board SDS2
10 6/25/2002
Errata and Contingencies
Microsoft* HCT Errata website:
http://www.microsoft.com/hwtest/search/results.asp?Type=Err&Key=System&Sort=Title
Sample List:
Operating System Identification Number Title
Windows* 2000 213 PNP Enable/Disable Test Issue
Windows 2000 350
PCI 2.1 Compliance Test Failure for Server Submissions that Do
Not Support Power Management
Windows 2000 418 ACPI Pre-OS tests are not required for system submissions
Windows 2000 722
PCI 2.2 Compliance test and PCI 2.1 (Cards) test might fail test
systems with ATA/ATAPI controllers
SDS2 Submission Readme File
Effective May 1, 2002, the new Microsoft standardized Readme form will be required for all hardware
submissions that include any of the following testing exceptions:
• Test failures
• Tests not run
• Missing test logs
• Inconclusive test results
All testing exceptions must be identified with a valid Errata ID, Incident ID, or Contingency ID
provided by WHQL. The new Microsoft standardized Readme file is available for download at:
http://download.microsoft.com/download/whistler/install/1.0/w98nt42kmexp/en-us/readme.exe
Testing Exceptions for SDS2 Update Submission
Data in this section reflects product data and test exceptions listed in section 2 of the SDS2 Readme file
at time of WLP Update submission.
Operating system
(Windows* XP, Windows 2000, etc.)
Failure type
(Contingency, Errata, Incident)
ID number
Windows 2000 Errata 722
Failing test name
PCI 2.1 (Cards) Test
Applicable error message
(Type N/A if the error message or
failing text is excessive or if there
is no text)
Errata Title: PCI 2.2 Compliance test and PCI 2.1 (Cards) test might fail test
systems with ATA/ATAPI controllers
Problem:
PCI2.1 (Cards) test fails with the following error:
BAR is 0x00002491, Length of BAR is 0xFFFF0004
ERROR: Base register 24 should be zero (read-only)!
No Extended capabilities required for this device