Report

Errata and Contingencies Intel® Server Board SE7520JR2ATAD1
12 November 1, 2004
Testing Exceptions for Intel® Server Board SE7520JR2ATAD1 Windows
Server 2003
Data in this section reflects product data and test exceptions listed in section 2 of the Intel® Server
Board SE7520JR2ATAD1 Readme file at time of WLP First-Time submission ID Number 902615.
Operating system
(Windows XP, Windows 2000, etc.)
Failure type
(Contingency, Errata, Incident)
ID number
Windows 2003 Enterprise
Edition
Errata 1066
Failing test name
Enable/Disable - Device I/O
Applicable error message
(Type N/A if the error message
or failing text is excessive or if
there is no text)
ID=STORAGE\VOLUME\1&30A96598&0&SIGNATURE15C015COFFSET7E00LENGTH2
8048B600
| Friendly Name=(null)
| DevDesc=Generic volume
| Test Interface=E:
| PnP
Interface=\\?\STORAGE#Volume#1&30a96598&0&Signature15C015COffset7E00Length2
8048B600#{53f5630d-b6bf-11d0-94f2-00a0c91efb8b}
Additional information
(for example, test system in a
multiple system configuration)
Operating system
(Windows XP, Windows 2000, etc.)
Failure type
(Contingency, Errata, Incident)
ID number
Windows 2003 Enterprise
Edition
Errata 670
Failing test name
PCI Pre-OS Tests:
PCI Configuration Header Dump test; Pcidump.log
PCI Power Management Register Interface test; Pcicap.log
Subsystem ID and Subsystem Vendor ID test; Pcisid.log
PCI Test Adapter Diagnostic test; Pmdiag.log
PME# Signal Routing test; Pcipme1.log
PME# Signal Routing - Simultaneous test; Pcipme2.log
PCI 3.3 Volt Auxiliary Power Load test; Pcivaux.log
System Wake Up test; Pciwake.log
PCI Voltage Requirement test; Pcivolt.log
PCI Voltage Requirement - 3.3 Vaux test; Pcivoltz.log
S3 Compliance test; S3test.log
Applicable error message
(Type N/A if the error message
or failing text is excessive or if
there is no text)
Additional information
(for example, test system in a
multiple system configuration)
PCI Pre-OS tests that use FoxFire cards are no longer required